-
-
-
Tổng tiền thanh toán:
-
1800.095
Tìm kiếm
Tài khoản
Giỏ hàng
Shock detection system for fences
G-FENCE 600/600Z is a shock detection technology allows to detect any attempt of intrusion by analysing vibrations caused by the intruder on the support on which the detector is installed. G-FENCE 600/600Z provides high detection performance as able to detect any attempt of intrusion by analysing vibration caused by intruder.
- Perimeter detection system
- Up to 600m perimeter detection
- Up to 10 detection zone (G-FENCE 600Z only)
- Configure sensitivity on device
- Detection/sensor : 3m width and 4m height panel
TECHNICAL CHARACTERISTICS
| Power supply | 12Vdc |
| Alarm output | 2 intrusion alarms (1 per zone) and 1 technical alarm |
| Operating Temperature | From -35°C up to +70°C (from -31°F up to 158°F) |
| Electromagnetic compatibility | Compliance with European standards (label CE) |
| Installation | 1 sensor per fence panel – up to 200m (656 ft) of addtionnal passive cable per cable start |
| Configuration | Auto-calibration – Sensitivity adjustment per sensor/zone at distance or locally without software |
| Remote maintenance | Integrated web server – Up to 1000 event log history |
RECOMMENDATIONS FOR INSTALLATION
It is important to install a detector cable in the middle of the fence panel with the supplied cableties and to fix a sensor by tightening one of the cable ties on the fence mesh.
To optimise the sensor’s detection, the sensor must be placed in the middle of the panel.
Entrances and gates: use at least a 0.6mm² standard cross-section cable with a maximum length of 200 m per-entrance or gate.
Technology :To secure a fence and detect any intrusion attempt, a detector cable is installed on the fence. During an intrusion, the sensors will detect vibrations on the fence and send information to the Control Units, which in turn analyse the information received before triggering an alarm, or not.The cable is pre-assembled with easy-to-install sensors helping to reduce installation costs.
